Peregrine Semiconductor Unveils the World’s Fastest GaN FET Driver

Peregrine’s UltraCMOS® Technology Enables GaN Transistors to Achieve Their Performance and Speed Potential

SAN DIEGO – July 12, 2016 – Peregrine Semiconductor Corp., founder of RF SOI (silicon on insulator) and pioneer of advanced RF solutions, introduces the word’s fastest gallium nitride (GaN) field-effect transistor (FET) driver, the UltraCMOS® PE29100. Built on Peregrine’s UltraCMOS technology, this new GaN driver empowers design engineers to extract the full performance and speed advantages from GaN transistors. Designed to drive the gates of a high-side and a low-side GaN FET in a switching configuration, the PE29100 delivers the industry’s fastest switching speeds, shortest propagation delays and lowest rise and fall times to AC-DC converters, DC-DC converters, class D audio amplifiers and wireless charging applications.

Peregrine Semiconductor unveils the world’s fastest gallium nitride (GaN) field-effect transistor (FET) driver, the UltraCMOS® PE29100.GaN-based FETs are disrupting the power conversion market and are displacing silicon-based metal–oxide–semiconductor field-effect transistors (MOSFETs). Compared to MOSFETs, GaN FETs operate much faster and have higher switching speeds in the smallest possible volume. The promise of GaN is that it can dramatically reduce the size and weight of any power supply. To reach their performance potential, these high-performance GaN transistors need an optimized gate driver. This FET driver must charge and discharge gate capacitance as fast as possible, and it must have very low propagation delay to allow fast signals. It also must avoid “shoot through” by not turning on high-side and low-side FETs at the same time. The PE29100 is designed specifically for this purpose.

“Our enhancement-mode GaN (eGaN®) transistors deliver a whole new spectrum of performance compared to MOSFETs,” says Alex Lidow, Ph.D., CEO and co-founder at EPC. “GaN FET drivers, like Peregrine’s UltraCMOS PE29100, enable design engineers to unlock the true potential of eGaN FET technology. The availability of the PE29100 further enhances our ability to deliver the best possible solution into the power conversion market where size, efficiency and simple design are critical.”

Peregrine’s UltraCMOS technology platform is the driving force behind the PE29100’s industry- leading speed. The technology enables integrated circuits to operate at much faster speeds than conventional CMOS technologies. It empowers Peregrine to manufacture a GaN FET driver with the industry’s shortest propagation delays, the lowest rise and fall times and the fastest switching speeds. This speed advantage results in significantly smaller power converters, which benefits the design engineer with increased power density.

“Design engineers are increasingly using GaN transistors for applications where higher switching frequency and high power is required,” says Mark Moffat, director of Peregrine’s power management product line. “However, the currently available gate drivers and controllers do not support the full potential of GaN. With the enabling power of UltraCMOS technology, the PE29100 achieves the industry’s fastest switching speeds at frequencies higher than competing products. By enabling GaN to reach its performance potential, UltraCMOS technology is enabling power innovation.”

Manufactured on a truly insulating substrate, UltraCMOS technology has no bulk or well junctions, and therefore has low parasitics. UltraCMOS technology also has low on-resistance for improved efficiency and low off-capacitance at higher operating frequency.

Features, Packaging, Price and Availability
The UltraCMOS PE29100 is a half-bridge GaN FET driver with internal dead-time control. The high-speed driver operates up to 33 MHz and handles voltages up to 80V. It delivers a short propagation delay of 8 ns. It has a rise time of 2.5 ns and fall time of 1.8 ns when driving a 1000 pF load and 1 ns rise and fall times with 100 pF load. The PE29100 has a one-pin, single-phase input mode and has an output source current of 2A and an output sink current of 4A.

Volume-production parts, samples and evaluation kits are available now. Offered as a 2 x 1.6 mm flip-chip die, the PE29100 is $1.80 each for 1k-quantity orders.

ABOUT PEREGRINE SEMICONDUCTOR
Peregrine Semiconductor Corporation, a Murata company, is the founder of RF silicon on insulator (SOI) and is a leading fabless provider of high-performance, integrated RF solutions. Since 1988 Peregrine and its founding team have been perfecting UltraCMOS® technology—a patented, advanced form of SOI—to deliver the performance edge needed to solve the RF market’s biggest challenges, such as linearity. By delivering best-in-class performance and monolithic integration, Peregrine products are the trusted choice for market leaders in automotive, broadband, industrial, Internet of Things, mobile devices, smartphones, space, test-and-measurement equipment and wireless infrastructure. A Murata company since December 2014, Peregrine holds more than 240 filed and pending patents and has shipped over 3.5 billion UltraCMOS units. For more information, visit https://psemi.com.

###

The Peregrine Semiconductor name, logo, and UltraCMOS are registered trademarks of Peregrine Semiconductor Corporation in the U.S.A., and other countries. eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.
All other trademarks mentioned herein are the property of their respective owners.

Markets

Power Management

Markets

  • High Linearity RF Switches

    Industry-leading linearity and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • High Isolation RF Switches

    Industry-leading isolation and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Low Insertion Loss RF Switches

    Industry-leading insertion loss and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Antenna Tuning Switches

    Industry-leading RF power handling and ruggedness
    Best-in-class harmonic and linearity
    Small form factor with robust ESD and reliability
  • 75Ω Wired Broadband Switches

    Unmatched linearity performance for DOCSIS 3.1
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD ratings and reliability
  • Broadband RF Switches

    Wideband support with a frequency range from 0 Hz to 67 GHz
    Industry-leading insertion loss, isolation, linearity and settling time
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Best-in-class ESD and reliability
  • High Power Switches

    Industry-leading power handling and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Automotive Switches

    AEC-Q100 Grade 2-certified supporting temperatures up to +105°C
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Extended Temperature RF Switches

    Wide temperature range support from -55°C to +125°C
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • 75Ω Wired Broadband RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • Glitchless RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • General-purpose RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • 2.4 GHz IoT FEMs

    Industry-leading monolithic Wi-Fi RF front-end solutions
    High linearity performance for Wi-Fi 6 and W-Fi 6E
    Compact form factors integrating high-performance RF, analog and digital
    Best-in-class ESD and reliability
  • Phase Shifters

    Ideal solutions for optimizing transmission phase angle
    Low root-mean-square (RMS) phase and amplitude error with fine phase resolution
    Digital control interface with parallel and serial programming options
    Best-in-class ESD and reliability
  • Monolithic Phase & Amplitude Controllers (MPACs)

    Reliable phase and amplitude control for next-generation communications
    Monolithic CMOS solution that integrates RF, analog and digital
    Integrated solution for Doherty power amplifier optimization (MPAC–Doherty)
  • Digital Tunable Capacitors (DTCs)

    Small form factor with high Q
    Monolithically integrated impedance tuning solution
    Wide-band tuning coverage, minimum mismatch losses, high linearity and fast switching speed
    Best-in-class ESD and reliability
  • Power Limiters

    Highly integrated solutions, smaller and more reliable than PIN-diode solutions
    Adjustable threshold control for maximum design flexibility
    High power handling and linearity required for wide-dynamic-range designs
    Fast response and recovery times for instantaneous protection and rapid return
  • Prescalers

    Exceptional performance with high-frequency support up to 13.5 GHz
    Low phase noise performance and low power consumption solutions
    Bare-die solutions for a wide variety of compact high-performance applications
    Best-in-class ESD and reliability
  • Mixers

    Broadband quad MOSFET array cores for high performance
    Industry-leading linearity, isolation and low conversion loss
    Available in MSOP, DFN and QFN packages
    Best-in-class ESD and reliability
  • Switch LNA

    Integrates dual-channel LNA with bypass function & high-power switch
    20W average RF input power
    Low noise figure of 0.9 dB
    +105°C operating temperature

Power Management

RF Mixers & Limiters

Front End Modules

RF Phase & Amplitude Control

Skip to content