Dual-channel Up-Down Converter
The PE128300 is a dual-channel TDD up-down converter designed for 5G FR2 n258 and n257 frequency bands. Up to 16 different mode definitions are pre-stored and selectable via a single-byte SPI command. Mode definitions contain seven elements: LO power on/off, V/H RX power on/off, V/H TX power on/off and V/H T/R switch state. Typical modes […]
Power Limiter, 20 MHz–2 GHz
OBSOLETE (OBS) This product is obsolete. For more information, please contact your local sales representative. The PE45140 is a HaRP™ technology-enhanced RF power limiter designed for use in tactical and military communications receivers, land-mobile-radio (LMR) and other high performance power limiting applications. This power limiter has symmetric RF ports that limit incident power up to […]
Power Limiter, 10 MHz–8 GHz
The PE45361 is a HaRP™ technology-enhanced power limiter designed for use in high performance power limiting applications in test and measurement (T&M) equipment and wireless-infrastructure transceivers and antennas. Unlike traditional PIN-diode solutions, the PE45361 achieves an adjustable input 1 dB compression point or limiting threshold via a low current control voltage (VCTRL), eliminating the need for […]
Power Limiter, 9 kHz–6 GHz
The PE45450 is a HaRP™ technology-enhanced power limiter designed for use in high performance power limiting applications in test-and-measurement (T&M) equipment, radar, military electronic counter measure receivers and wireless infrastructure transceivers and antennas. Unlike traditional PIN diode solutions, the PE45450 achieves an adjustable input 1 dB compression point or limiting threshold via a low current control […]
Divide-by-4 Prescaler, 3–13.5 GHz
The PE35400 is a high-performance UltraCMOS® prescaler with a fixed divide ratio of 4. It supports an operating frequency range from 3–13.5 GHz. It operates on a single voltage supply with a frequency-selecting bias resistor and draws a low current of 16 mA. The PE35400 is available in bare die.
Ultra-high Linearity Broadband Quad MOSFET Array
The PE4140 is a high linearity, passive broadband quad MOSFET array with high dynamic range performance capable of operation beyond 6 GHz. This quad array operates with differential signals at all ports (RF, LO, IF), allowing mixers to be built that use LO powers from -7 dBm to +20 dBm. Typical applications range from frequency […]
Ultra-linear Broadband Quad MOSFET array
The PE4141 is a high linearity passive broadband Quad MOSFET array with high dynamic range performance capable of operation up to 1 GHz. This quad array operates with differential signals at all ports (RF, LO, IF), allowing an analog multiplexer to be built that uses LO ports as digital controls, RF and IF port as […]
Low Frequency Passive Mixer with Integrated LO Amplifier
The PE4151 is an ultra-high linearity quad metal-oxide-semiconductor field-effect transistor (MOSFET) mixer with an integrated local oscillator (LO) amplifier. The LO amplifier allows for LO drive levels of less than 0 dBm to produce third-order intercept point (IIP3) values similar to a quad MOSFET array driven with a 15 dBm LO drive. It is designed […]
Low Frequency Passive Mixer with Integrated LO Amplifier
The PE4152 is a high linearity quad metal-oxide-semiconductor field-effect transistor (MOSFET) mixer with an integrated local oscillator (LO) amplifier. The LO amplifier allows for LO input drive levels of less than 0 dBm to produce third-order intercept point (IIP3) values similar to a quad MOSFET array driven with a 15 dBm LO drive. The PE4152 […]